Batch Consistency – Ceramic Pot Water Filters

At Potters Without Borders our focus is on the transfer of skills required to manufacture strong, effective ceramic pot water filters. Manufacturing filters as an appropriate technology requires the utilization of locally sourced skills and raw materials. For technicians, the main challenge is to go through the process required to develop a working filter body within a short time, using greatly variable materials. Although these materials may differ between factories, it is very important to maintain batch consistency when selecting materials for what is essentially a health product.

Establishing a reliable mixture of clay, burnouts, and accessory materials requires a period of testing and troubleshooting. Although working mixtures have been established in other factory locations, the information gained from these experiments only give us a general idea of where to start. It is not only necessary to begin factory production with a lengthy testing period, but every time a new batch of raw materials comes into the factory, testing must be done to make sure they are of consistent source and quality.

Developing a system of record-keeping and filter numbering is a critical aspect of manufacture troubleshooting. Factories that have been in production for years discover, suddenly, peculiar changes in filter functioning or appearance. By going back through the logs we can discover if the change occured because of a change of material sourcing, or a firing schedule fluctuation.

When selecting a source of raw materials, one must consider that it is a finite resource. A feasability study attempts to identify problems of inconsistant availablilty, contaminated sources, or insufficient material for the lifetime of the factory. The variable nature of naturally sourced materials makes it impossible to produce an identical product every time, but following certain procedures allows us to produce a greater number of filters which fall within the range of acceptability.

Production protocols which have been extablished in the first months of setup should be recorded and maintained. Any improvements, or changes to manufacturing procedures must be recorded and re-produced through several operating cycles in order to be proven.

Finally, we must realize that producing a homogenous filter is beyond the scope of appropriate technology as it applies to these filters. What we want is to produce an effective filter as simply as possible with locally sourced materials and abilities. Consistency in materials, sourcing, and testing increases the percentage of effective filters in each production cycle.